Shop Online

Categories » Fittings & Misc

JOHN GUEST FITTINGS
 
CPC - FITTINGS
 
MISC
 

Fittings & Misc

Categories

LATEST PRODUCTS
ADJUNCTS & LUBES
BRAUMEISTER & ACCES.
BREWING EQUIPMENT
CLEANERS & SANITISERS
ESSENCES
FILTERS - LIQUID & AIR
FITTINGS & MISC
» John Guest Fittings
» CPC - Fittings
» Misc
FONTS & DRIP TRAYS
FRESH WORT KITS
GIFTS & PUBLICATIONS
GRAIN - MALT - EXTRACT
HOPS
KEGGING GEAR
LINE & TUBING
MEASURE & CONTROL
PLUMBING
TAPS, SHANKS ETC...
TUBELOK
YEAST


Cart Summary


Total: AUD $0.00
Cart Weight: 0 Kgs


VIEW SHOPPING CART


Products Displayed  

1 2  Next »
Page 1 of 2: Entries 1 - 75 of  81 Products
Photo   Name   Price Add to Cart
1000 ml Reagent Bottle Borosilicate Glass (1000 ML)
These Reagent Bottles are made from the same heat resistant laboratory borosilicate glass as Erlenmeyer Flasks.They are ideal for use in making small starters or yeast rehydration.They cannot be used on a stovetop or burner.
PLEASE NOTE: Due to the fragile nature of the glass, we cannot ship by satchels.
Please select Auspost Parcel or Courier Parcel service at checkout.

more
AUD  $10.50 Currently
Not Available
 
0 Items
2 Way Divider OD 5/16" (8mm)
Used to split a gas line between 2 kegs, sat side by side in a fridge.
Use in conjuntion with 2 x Equal Tees to feed 4 kegs.
more
AUD  $9.00    
0 Items
500 ml Reagent Bottle Borosilicate Glass (500 ML)
These Reagent Bottles are made from the same heat resistant laboratory borosilicate glass as Erlenmeyer Flasks.They are ideal for use in making small starters or yeast rehydration.They cannot be used on a stovetop or burner.
PLEASE NOTE: Due to the fragile nature of the glass, we cannot ship by satchels.
Please select Auspost Parcel or Courier Parcel service at checkout.

more
AUD  $5.50    
0 Items
Ball Valve (Double Barb)
Chrome plated, inline ball valve, Rated for use with CO2 lines. more
AUD  $15.00 Currently
Not Available
 
0 Items
Beer Filter - Gravity connector
Don't waste your CO2 - Gravity Filter.
This neat little set up pushes straight onto a standard fermenter tap (tube ID 10mm)
You then simply plug your 8mm OD "Filter in" line into the quick release fitting.
more
AUD  $7.00 Currently
Not Available
 
0 Items
Beer/Gas Control Valve (5/16", 8mm)
Festo Brand Beer/Gas Control Valve (5/16", 8mm). Use this quick release fitting as a gas line shut off or inline with our 
Beer Filter to control the flow.
more
AUD  $29.50 Currently
Not Available
 
0 Items
Beer/Gas line (OD 8mm, ID 5mm)
Highly polished line with a narrower ID (OD 8mm - ID 5mm) than our regular
JG line. Perfect for quick release connections. (Sold by the metre).
more
AUD  $1.90    
0 Items
Beer/Gas Line (OD 8mm, ID 6mm)
Highly polished line with a thinner wall thickness (OD 8mm - ID 6mm) than standard
beer line. Perfect for quick release gas connections. (Sold by the metre).
more
AUD  $1.90    
0 Items
Bottle brush - Horse Hair
Bottle brush - Horse Hair
more
AUD  $8.90    
0 Items
Bottle Brush - Nylon
Nylon Bottle Brush
more
AUD  $4.90    
0 Items
Brush - Dual End 1/2"&3/4" Diameter
Brush - Dual End- 1/2" Bristle Diameter x 2" Bristle Length on one end and 3/4" Bristle Diameter x 2" Bristle length on the other end.
more
AUD  $8.90 Currently
Not Available
 
0 Items
Brush - Faucet 5/8"x3 1/4"
Brush - Faucet 5/8" x 3 1/4". 5/8" Diameter Bristle, 3 1/4" Bristle Length. Very stiff bristle.
more
AUD  $10.50 Currently
Not Available
 
0 Items
Bulkhead Connector OD 5/16" (8mm)
Use for joining lines through solid objects. Can be used on your 
fermenter lid to fit a blow off tube or pressurise the contents.
more
AUD  $9.50    
0 Items
Cask Widge Float - Red 9-11g
Cask Widge Float - Red 9-11g. Fantastic little float device that we use in our casks for our handpumped ales at Bacchus Brewery. The plastic float with SS mesh will draw beer from just under the surface of the liquid. So it doesn't matter how much yeast or hop material is sitting at the bottom of the keg. You will always draw off debris free beer. Perfect for use in a corny keg for dispensing in the same way. An absolute must if you like dry hopping or naturally carbonating in the keg. Simply replace the longer liquid dip tube with a shorter gas dip tube. The silicone hose will fit snugly over the shorter diptube inside the keg. Hose length approx 580 mm.
more
AUD  $29.50    
0 Items
Collet Locking Tool
The Collet Locking tool makes line removal a breeze.
A tool for every fitting.
more
AUD  $9.50    
0 Items
Compression Fitting 1/2" OD x 1/2" Thread (1/2" x 1/2")
Tube Compression Fitting 1/2" BSPM to 1/2" (12.7mm). more
AUD  $14.95 Currently
Not Available
 
0 Items
CPC Beer & GAS QD Set
These quick disconnects feature 1/4" barbed fittings which can be used
with 5mm to 7mm ID line. The quick disconnect functionality is activated by
a shrouded thumb latch. They can handle a vacuum to 120 psi.
more
AUD  $39.50    
0 Items
CPC Bulkhead Fitting (F barb)
This CPC fitting is designed as a Panel Mount Fitting for wall thicknesses
no greater than 1/4". Not designed for curved walls such as Kettles.
more
AUD  $44.50 Currently
Not Available
 
0 Items
CPC Female 1/2" Barb
Great food grade quick disconnects. They are made of Polysulfone plastic,
which is food grade up to 135c and can handle upto 125 psi. This piece is 
the female side that has 1/2" barb to connect to any 1/2" I.D. tubing.
more
AUD  $29.50 Currently
Not Available
 
0 Items
CPC Female 1/2" MPT
Great food grade quick disconnects. They are made of Polysulfone plastic, which 
is food grade up to 135c & can handle upto 125 psi. This piece is the female side 
that can be used with our CPC Male 1/2"  fittings.
more
AUD  $28.50    
0 Items
CPC Male 1/2" Barb
Great food grade quick disconnects. They are made of Polysulfone plastic,
which is food grade up to 135c and can handle upto 125 psi. This piece is 
the male side that has 1/2" barb to connect to any 1/2" I.D. tubing.
more
AUD  $28.50 Currently
Not Available
 
0 Items
CPC Male 1/2" MPT
Great food grade quick disconnects. They are made of Polysulfone plastic, 
which is food grade up to 135c and can handle upto 125 psi. This piece is 
the male side that can be used with our CPC Female 1/2" fittings.
more
AUD  $23.90    
0 Items
CPC O-Ring

Made from EPDM material, these gaskets are to replace the
stock ones that come with the CPC quick disconnect fittings.

more
AUD  $2.50 Currently
Not Available
 
0 Items
Crown Seals - Gold 250pk
Standard Crown Seals - Bottle Caps Gold 250pk. more
AUD  $7.95    
0 Items
Crown Seals- Tirage 29mm 100pk (For Champagne Bottles)
Tirage Caps/Crown Seals 29mm for use on Champagne Bottles.
You will also need a Tirage Bell www.craftbrewer.com.au/shop/details.asp that can be retro fitted to a Super Auto Bench Capper. Note: These caps cannot be used with a standard capping bell.
more
AUD  $7.95    
0 Items
Demijohn Clip Stoppers 5L
Clip stopper lid tops for 5 litre Demijohns.
more
AUD  $2.90    
0 Items
Elbow Nipple set (Barb 6mm)
Elbow Set for standard 5/8" shank.
Shank is Stainless Steel.
more
AUD  $13.50 Currently
Not Available
 
0 Items
Equal Elbow - OD 5/16" (8mm)
Beer & Gas line Elbow. Make 90 degree turns.
Great for running lines round corners.
more
AUD  $7.00    
0 Items
Equal Straight Connector OD 5/16" (8mm)
Beer & Gas line connector. 
Use to extend/join your beer & gas lines.
more
AUD  $5.00    
0 Items
Equal Tee OD 5/16" (8mm)
Beer & Gas line Tee piece.
Use in conjuction with the 2 Way Divider to split gas line between 4 kegs.
more
AUD  $9.00    
0 Items
Faucet Brush - 3/4" x 3"
Faucet Brush - 3/4" x 3". 3/4" Diameter Bristle, 3" Bristle Length. 
more
AUD  $8.90    
0 Items
Faucet Brush 1/8" x 2"
Faucet Brush 1/8" x 2". 1/8" Bristle Diameter x 2" Bristle Length.
more
AUD  $4.90 Currently
Not Available
 
0 Items
Female Adapator - Thread 1/2" BSP x OD 5/16" (8mm)
Connects your 8mm beer line to a male 1/2" BSP thread. more
AUD  $9.00    
0 Items
Female Adaptor - Thread 5/8" BSP x OD 5/16" (8mm)
Connects beer line directly to your Celli Tap or through fridge shank thread 
(or any other 5/8" BSP thread). Use in conjunction with Stem Elbow to 
stop beer line protruding into fridge.
more
AUD  $9.00    
0 Items
Female Adaptor 1/4" FFL x 5/16" (8mm)
This brilliant little adaptor screws straight onto your MFL Quick Disconnect, 
allowing 360 degree movement. 5/16" FFL x OD 5/16" (8mm).
more
AUD  $7.00    
0 Items
Fermenter Tap -SNAP TAP
Fermenter Tap - SNAP TAP. 3/4" BSP Thread. Fits most plastic fermenters and cubes.
.
more
AUD  $9.95    
0 Items
Flow Bend Clip (8mm - 5/16")
The Flow Bend support stops you beverage tube from crimping when bent at
90 degrees. Handy in those tight spots when flexible tube is used.
more
AUD  $2.90    
0 Items
Funnel 15cm Plastic
Funnel 15cm Plastic
more
AUD  $4.90    
0 Items
Funnel 30cm Plastic with Mesh Screen
Funnel 30cm Plastic. Comes with a wire mesh filter that clips easily in and out of the funnel.
more
AUD  $19.90    
0 Items
Funnel 8cm Plastic
Funnel 8cm Plastic
more
AUD  $3.50    
0 Items
Glass Measuring Cylinder - Hydro Test Tube - 250ml
Borosilicate Glass Measuring Cylinder - Hydro Test Tube. 250ml measuring capacity with 2 ml graduations. Cylinder length approx 295mm. Cylinder ID approx 37mm.
PLEASE NOTE: Due to the fragile nature of the glass, we cannot ship by satchels.
Please select Auspost Parcel or Courier Parcel service at checkout.


more
AUD  $9.95    
0 Items
Grain Bag - With Draw String 50 x 65 CM
Economical Grain Bag - With Draw String Approx 50 x 65 CM. Good for around 3-4 kg of grain. Perfect size for a 19 litre pot.
more
AUD  $9.95    
0 Items
Grolsch Bottle Clip Top 30pk
Grolsch Bottle Clip Top 30pk
more
AUD  $7.95    
0 Items
Grolsch Bottle Rubber Seal 30pk
Grolsch Bottle Rubber Seal 30pk
more
AUD  $4.50    
0 Items
Grommet - Airlock
Grommet - Airlock
more
AUD  $0.95    
0 Items
Growler filler - Perlick

more
AUD  $14.90    
0 Items
Hydro Test Tube - Jar White Base With Cap (ALLA)
Lightweight Plastic Hydro Test Jar / Tube. Removable screw on base and cap. Tube length approx 320 mm. This tube will accommodate most hydrometers.
more
AUD  $9.90    
0 Items
Hydrometer Final Gravity - (Final Gravity)
Precisely read your finishing gravities in beer with this narrow-range, highly accurate hydrometer. The scale range is only .990-1.020, but the individual gradients are extra large allowing for an easy read. Length approx 300mm.
more
AUD  $42.50 Currently
Not Available
 
0 Items
Hydrometer Test Tube (Red Base)
Sturdy plastic 2 piece Hydrometer Test Tube. Tube length approx 250 mm. Will work with our standard hydrometers.
more
AUD  $8.90    
0 Items
Jiffy Box - 157 x 95 x 53mm
Moulded in ABS black plastic, this jiffy box is the perfect size for
most of our temperature controller kits. Specially patented recessed grid 
on underside of lid to facilitate drilling,cutouts, etc .
Not suitable for use with our TempMate controler, which requires a larger box
more
AUD  $6.90    
0 Items
Keg Coupler Adaptor - Gas

more
AUD  $19.95    
0 Items
Keg Coupler Adaptor - Liquid

more
AUD  $19.95    
0 Items
Keg Coupler Elbow
Keg Coupler Elbow Chrome Plated 5/8" x 5/8". For use on commercial keg couplers inside a Kegerator fridge where height is restricted. Most commonly used with A type keg/coupler as the A type( Lion Nathan, Tooheys, XXXX) kegs are taller.
more
AUD  $29.90    
0 Items
Locking clip
Secure your connections with this handy clip. more
AUD  $0.90    
0 Items
Non Return Valve OD 5/16" (8mm)
EVERY keg setup should have one - Ensures protection against 
reversal of flow in your lines - Essential protection for your regulator.
more
AUD  $27.00    
0 Items
Oxy Wand SS 0.5 Micron Stone (0.5 Micron)
The OxyWand™ is a new take on existing Oxygen wands. Featuring a 24" long 1/4" stainless tube, this wand is made with a flared end to mate directly with existing flared oxygen stones.
more
AUD  $47.50 Currently
Not Available
 
0 Items
Oxy Wand SS 2 Micron Stone (2 Micron)
The OxyWand™ is a new take on existing Oxygen wands. Featuring a 24" long 1/4" stainless tube, this wand is made with a flared end to mate directly with existing flared oxygen stones.
more
AUD  $47.50    
0 Items
Plug - OD 5/16" (8mm)
End cap for quick release fittings more
AUD  $1.50    
0 Items
Screw in cap for 50lt D Type Keg
These stainless steel keg caps are an alternative closure to a normal keg spear in a D Type keg. The keg cap is made from 304 stainless and can be removed and fitted by hand. They are hand welded and are not a sanitary fitting. Not designed for use with beer.
more
AUD  $24.50    
0 Items
Shutoff Valve for Gas Manifold MFL
Shutoff  Ball Valve for Gas Manifold. 1/4" NPT x 1/4" MFL.
You will also need either a Swivel Nut & Barb Kit
or our preference a Female Adaptor 1/4" FFL x 5/16" (8mm)

more
AUD  $9.95    
0 Items
Silicon Bung 25 x 38 Bored
Silicon Bung 25 x 38mm Bored
more
AUD  $5.25    
0 Items
Silicone Bung 17 x 25 Solid
Silicone Bung 17 x 25 Solid
more
AUD  $4.90    
0 Items
Silicone Bung 17x25 Bored
Silicone Bung 17x25 Bored
more
AUD  $4.90    
0 Items
Splice Barbed (Stainless 4mm - 6mm)
Splice for joining our beer/Gas line to out pump/airstone line. more
AUD  $8.90    
0 Items
SS Tee Barb (13mm)
SS Tee Barb for splitting out 1/2" Silicon hose. more
AUD  $6.90 Currently
Not Available
 
0 Items
Stem Elbow - Stem OD 5/16" (8mm)
Use in conjunction with Female Adaptor on back of tap to save fridge space. more
AUD  $7.00    
0 Items
Stepless Clamp SS 10.5mm (8-10mm OD Line)
Stainless Steel stepless clamp for securing beer/gas line 8mm to 10mm OD.
more
AUD  $0.80    
0 Items
Stir Bar - Magnetic 1"
Stir Bar - Magnetic 1" more
AUD  $12.90    
0 Items
Straight Adaptor 1/4 NPTF x 5/16 (8mm)
This straight adaptor can be used to convert our Counter Pressure
Bottle filler from barbed to quick release fittings.
more
AUD  $5.00    
0 Items
Straight Adaptor 1/4" BSP x 5/16" (8mm)
This adaptor is used to connect the line on our beer filter.
It is also used to connect beer & gas line to our Peristaltic Pump tubing.
more
AUD  $5.00    
0 Items
Straight Reducer - 1/2" - 3/8"
more
AUD  $7.00    
0 Items
Straight Reducer 3/8" to 5/16" (8mm)
Use this inline reducer to connect our Compensator to 8mm OD line more
AUD  $5.00    
0 Items
Super Auto Bench Capper Replacement Standard Capping Bell
Super Auto Bench Capper Replacement Standard Capping Bell. Replacement bell for standard 26mm caps / crown seals.
more
AUD  $14.70    
0 Items
Super Automatica - Tirage Capping Bell (For 29 mm Tirage Caps For Champagne Bottles )
Super Automatica - Capping Bell 29mm Tirage Cap. For use with 29 mm Tirage caps www.craftbrewer.com.au/shop/details.asp for champagne bottles. This bell can be retro fitted to a Super Automatica Bench Capper www.craftbrewer.com.au/shop/details.asp.
Note: this bell will not work with standard crown seals/caps.

more
AUD  $14.70    
0 Items
Swivel Nut & Barb Kit
This is a kit consisting of chromed 1/4" swivel nut & S/S 5mm barb
that will attach to threaded quick disconnects or other 1/4" male flare fittings
& allow 5mm or 4mm ID Beer/Gas line to be attached.
more
AUD  $7.90    
0 Items
1 2  Next »
Page 1 of 2: Entries 1 - 75 of  81 Products

View Shopping Cart »