All Categories
    Filters
    Preferences
    Search

    Fittings & Misc

    View as Grid List
    Sort by
    Display per page

    2 Way Divider OD 5/16" (8mm)

    JG-PM2308S
    $9.00

    In stock

    Used to split a gas line between 2 kegs, sat side by side in a fridge.
    Use in conjuntion with 2 x Equal Tees to feed 4 kegs.

    Adaptor Fatlock

    FATLOCKADPT-LP
    $45.00

    In stock

    Stainless steel 3/4" Fatlock Adaptor for connecting tap to font.
    You will also require a Shank Adaptor & coupling nut available seperately.

    Adaptor Fatlock (Gold)

    FATLOCKADPTGLD-LP
    $79.00

    In stock

    Gold Plated, Stainless steel 3/4" Fatlock Adaptor for connecting tap to font.
    You will also require a Shank Adaptor & coupling nut available seperately.

    Adaptor Kit (Snaplock)

    ADAPTKITTTOF
    $74.90

    Out of stock

    Coupling kit, for connecting a standard 5/8" threaded tap to a font.
    Consists of S/S Downey Column, Adaptor Shank - 3/4" S/S Fatlock Adaptor.

    Adaptor shank

    ADAPTSHANK-LP
    $23.50

    In stock

    Adaptor Shank & Coupling Nut

    ADPTSH&CNUT
    $36.50

    Out of stock

    Connect a standard 5/8" threaded tap to a snaplock font. If you only have 
    the bare font, you will also require the "Fatlock Adaptor".

    Bulkhead Connector 1/2"

    JG-PI1216S
    $14.50

    In stock

    Bulkhead Connector OD 5/16" (8mm)

    JG-PM1208E
    $9.50

    In stock

    Use for joining lines through solid objects. Can be used on your 
    fermenter lid to fit a blow off tube or pressurise the contents.

    Compression Fitting 1/2" OD x 1/2" Thread (1/2" x 1/2")

    COMPFIT1/2
    $14.95

    Out of stock

    Tube Compression Fitting 1/2" BSPM to 1/2" (12.7mm).

    Coupling Nut - Chrome

    COUPNUT-LP
    $14.90

    In stock

    Coupling nut for beer tap.

    Coupling Nut - Gold

    COUPNUTGLD-LP
    $14.50

    In stock

    Coupling nut for beer tap.

    CPC Beer & GAS QD Set

    CPCH550
    $39.50

    Out of stock

    These quick disconnects feature 1/4" barbed fittings which can be used
    with 5mm to 7mm ID line. The quick disconnect functionality is activated by
    a shrouded thumb latch. They can handle a vacuum to 120 psi.

    CPC Female 1/2" MPT

    CPCH501A
    $28.50

    In stock

    Great food grade quick disconnects. They are made of Polysulfone plastic, which 
    \r\nis food grade up to 135c & can handle upto 125 psi. This piece is the female side 
    \r\nthat can be used with our CPC Male 1/2"  fittings.

    CPC Male 1/2" Barb

    CPCH501F
    $28.50

    In stock

    Great food grade quick disconnects. They are made of Polysulfone plastic,
    which is food grade up to 135c and can handle upto 125 psi. This piece is 
    the male side that has 1/2" barb to connect to any 1/2" I.D. tubing.

    CPC Male 1/2" MPT

    CPCH501B
    $23.90

    Limited stock

    Great food grade quick disconnects. They are made of Polysulfone plastic, 
    which is food grade up to 135c and can handle upto 125 psi. This piece is 
    the male side that can be used with our CPC Female 1/2" fittings.

    Equal Elbow - OD 5/16" (8mm)

    JG-PM0308S
    $7.00

    In stock

    Beer & Gas line Elbow. Make 90 degree turns.
    Great for running lines round corners.

    Equal Straight Connector OD 5/16" (8mm)

    JG-PM0408S
    $5.00

    In stock

    Beer & Gas line connector. 
    Use to extend/join your beer & gas lines.

    Equal Tee OD 5/16" (8mm)

    JG-PM0208S
    $9.00

    In stock

    Beer & Gas line Tee piece.
    Use in conjuction with the 2 Way Divider to split gas line between 4 kegs.

    Faucet Spout Plug

    FSP1000
    From $1.50

    In stock

    Purchase 5 or more & the price drops to $1.50 each, automatically.
    A spout plug is an economical solution for controlling fruit flies, cockroaches, 
    yeast and bacteria buildup when the faucet is not in use. 
    Please note: Current stock are black in colour, not red as shown.

    Female Adaptor - Thread 1/2" BSP x OD 5/16" (8mm)

    JG-PI451014FS
    $9.00

    In stock

    Connects your 8mm beer line to a male 1/2" BSP thread.

    Female Adaptor - Thread 5/8" BSP x OD 5/16" (8mm)

    JG-P1451015FS
    $9.00

    In stock

    Connects beer line directly to your Celli Tap or through fridge shank thread 
    (or any other 5/8" BSP thread). Use in conjunction with Stem Elbow to 
    stop beer line protruding into fridge.

    Female Adaptor 1/4" FFL x 5/16" (8mm)

    JG-PM4058F4S
    $7.00

    In stock

    This brilliant little adaptor screws straight onto your MFL Quick Disconnect, 
    allowing 360 degree movement. 5/16" FFL x OD 5/16" (8mm).

    Female Twin Adaptor - Thread 3/8" x 5/16" (8mm)

    JG-CELLIADPT
    $16.00

    Out of stock

    This quick release fitting connects directly to your Celli through fridge shank 
    (or any other 3/8" BSP thread). Improves line management within your fridge.

    Fermenter Tap -SNAP TAP

    MBTAPSSNA
    $9.95

    In stock

    Fermenter Tap - SNAP TAP. 3/4" BSP Thread. Fits most plastic fermenters and cubes.
    .

    Flow Bend Clip 8mm

    JG-PM2608S
    $2.90

    In stock

    Flow Control Adaptor (Stainless)

    FLOWCONTADPT
    $59.00

    Limited stock

    Retrofit any U.S. or Aus. style shank and faucet with this flow control adapter.
    Adjustments are easy & tamper-proof by using the removable Allen wrench key.
    Beer comes in contact with 304 stainless steel only.

    Gravity Filter connector

    FILGRAVFIT
    $7.00

    In stock

    Growler Filler - Perlick 525 Model Taps

    GROWLERFILLPERL
    $14.90

    In stock

    Growler Filler - Perlick 525 Model Taps. Only fits 525 model taps.

    Growler Filler - Standard Tap

    GROWLERFILLTAP
    $14.90

    In stock


    Growler Filler Spout Intertap (Screw In)

    TAPINTERTAPGRWLRFILLER
    $9.90

    In stock

    This Growler/Bottle filling spout can be fitted to both the Intertap SS Tap and Intertap Chrome Plated tap. The Spout has a 13mm barb which you can attach some hose so you can fill your growler or bottle from the bottom up to minimise foaming.

    Hydro Test Tube - Jar White Base With Cap (ALLA)

    HYDROJARALLA
    $9.90

    In stock

    Lightweight Plastic Hydro Test Jar / Tube. Removable screw on base and cap. Tube length approx 320 mm. This tube will accommodate most hydrometers.

    Inoculation loop - Disposable

    INOCLOOP
    $1.00

    In stock

    Inoculation loop - Disposable

    Inoculation Needle - Nichrome

    INOCNEEDLE
    $7.90

    In stock

    Nichrome metal with aluminum handle.

    John Guest Shut off valve 3/8" x 3/8"

    JG-PISV0412S
    $29.50

    In stock

    John Guest Shut off valve to suit 3/8" OD hose. Use in conjunction with these reducer fittings www.craftbrewer.com.au/shop/details.asp for 8mm OD hose.

    Keg Coupler Adaptor - Gas

    COUPLADPTGAS
    $19.95

    In stock

    Keg Coupler Adaptor - Gas. 5/8" Thread.

    Keg Coupler Adaptor - Liquid

    COUPLADPTLIQ
    $19.95

    Out of stock

    Keg Coupler Adaptor - Liquid. 5/8" Thread.

    Keg Coupler Elbow

    COUPELBOW
    $29.90

    In stock

    Keg Coupler Elbow Chrome Plated 5/8" x 5/8". For use on commercial keg couplers inside a Kegerator fridge where height is restricted. Most commonly used with A type keg/coupler as the A type( Lion Nathan, Tooheys, XXXX) kegs are taller.

    Locking clip

    JG-PMC1808R
    $0.90

    In stock

    Locking Nut (Brass 3/8")

    LOCKNUT-LP
    $2.50

    In stock

    Brass locking nut for tap shank.

    Non Return Valve OD 5/16" (8mm)

    JG-5/16SCV
    $27.00

    In stock

    EVERY keg setup should have one - Ensures protection against 
    reversal of flow in your lines - Essential protection for your regulator.

    Plug - OD 5/16" (8mm)

    JG-PM0808S
    $1.50

    In stock

    End cap for quick release fittings

    Screw in cap for 50lt D Type Keg

    KEGSCREWINCAP50LT
    $24.50

    In stock

    These stainless steel keg caps are an alternative closure to a normal keg spear in a D Type keg. The keg cap is made from 304 stainless and can be removed and fitted by hand. They are hand welded and are not a sanitary fitting. Not designed for use with beer.

    Shutoff Valve for Gas Manifold MFL

    SHUTOFFVAL1/4
    $9.95

    In stock

    Shutoff  Ball Valve for Gas Manifold. 1/4" NPT x 1/4" MFL.
    You will also need either a Swivel Nut & Barb Kit
    or our preference a Female Adaptor 1/4" FFL x 5/16" (8mm)

    Splice Barbed (Stainless 4mm - 6mm)

    SPLICEREDCNG
    $8.90

    In stock

    Splice for joining our beer/Gas line to out pump/airstone line.

    Stem Elbow - Stem OD 5/16" (8mm)

    JG-PM220808S
    $7.00

    In stock

    Use in conjunction with Female Adaptor on back of tap to save fridge space.

    Stem Elbow 3/8 x Tube O/D 5/16

    JG-P1221210S
    $9.00

    In stock

    Stepless Clamp SS 10.5mm (8-10mm OD Line)

    CLAMPSS5MM
    $0.80

    In stock

    Stainless Steel stepless clamp for securing beer/gas line 8mm to 10mm OD.

    Stout Spout for Intertap Tap

    TAPINTERTAPSTOUTSPOUT
    $14.90

    Out of stock

    Both the Intertap SS Tap and Intertap Chrome Plated Tap can be turned into an stout/creamer tap with the use of this nozzle.The Stout Spout has a removeable creamer/aerator disc inside, it is specially made to serve beers infused with nitrogen gas, and allows the nitrogen gas to flow smoothly through the faucet with the beer to create a smoother, creamier beer.

    Straight Adaptor 1/4 NPTF x 5/16 (8mm)

    JG PM10822S
    $5.00

    In stock

    This straight adaptor can be used to convert our Counter Pressure
    Bottle filler from barbed to quick release fittings.

    Straight Adaptor 1/4" BSP x 5/16" (8mm)

    JG-PM10802S
    $5.00

    In stock

    This adaptor is used to connect the line on our beer filter.
    It is also used to connect beer & gas line to our Peristaltic Pump tubing.

    Straight Adaptor 3/8-5/16

    JG-PM010823S
    $9.00

    In stock

    Straight Connecter SF/SS 8mm

    JG-SM040808S
    $7.00

    Out of stock


    Straight Reducer - 1/2" - 3/8"

    JG-PI201612S
    $7.00

    Limited stock

    Straight Reducer - 5/16" - 3/1

    JG-PI201006S
    $5.00

    In stock

    Straight Reducer 3/8" to 5/16" (8mm)

    JG-PI061210S
    $5.00

    In stock

    3/8" Stem x 5/16" (8mm OD) Tube. Use this inline reducer to connect our John Guest 3/8" Shut Off Valve to 8mm OD hose.

    Super Auto Bench Capper Replacement Standard Capping Bell

    CAPPERBELLSUPERAUTOSTD
    $14.70

    In stock

    Super Auto Bench Capper Replacement Standard Capping Bell. Replacement bell for standard 26mm caps / crown seals.

    Swivel Nut & Barb Kit

    SWNUTKIT
    $7.90

    In stock

    This is a kit consisting of chromed 1/4" swivel nut & S/S 5mm barb
    that will attach to threaded quick disconnects or other 1/4" male flare fittings
    & allow 5mm or 4mm ID Beer/Gas line to be attached.

    Swivel Nut 5/8 x 6mm Barb CP

    SWNUTKIT5/8CB
    $9.90

    In stock

    Swivel Nut Kit (5/8" Stainless)

    SWNUTKIT5/8SS
    $10.50

    Out of stock

    This is a kit consisting of chromed 5/8" swivel nut, S/S 6mm barb & nylon seal, that
    will allow you to connect 5mm or 6mm ID beer line to your through fridge shank. 
    All parts that come in contact with your beer are Stainless.

    Tee Piece (Stainless Barbed 6mm)

    TEEBARBS/S
    $4.95

    In stock

    6MM Stainless Steel Tee Barb for splitting gas lines. 
    Suitable for 5mm or 6mm ID line.

    Fittings & Misc

    Filter by:

    Clear All
    Min: $0.00 Max: $79.00
    $0 $79