Economical, Beer/Gas line. The line sold by most Homebrew Stores.
Sold by the metre.

Gas In post for Cornelius Keg.
These are 2nd hand posts in good condition.
They do not come with poppet or post seals - please order separately if req'd.

Carbonation and Line Cleaning Cap and Counter Pressure Bottle Filling Device 

Cask Widge Float - Red 9-11g. Fantastic little float device that we use in our casks for our handpumped ales at Bacchus Brewery. The plastic float with SS mesh will draw beer from just under the surface of the liquid. So it doesn't matter how much yeast or hop material is sitting at the bottom of the keg. You will always draw off debris free beer. Perfect for use in a corny keg for dispensing in the same way. An absolute must if you like dry hopping or naturally carbonating in the keg. Simply replace the longer liquid dip tube with a shorter gas dip tube. The silicone hose will fit snugly over the shorter diptube inside the keg. Hose length approx 580 mm.

Premium Quality Keg Charger and Disconnect. Genuine Innovations Brand.
Ideal for dispensing party kegs. Just connect directly to your keg "gas in" post & use the trigger to apply gas as required. 
Takes 16gm threaded CO2 bulbs. Includes MFL Disconnect.

Threaded CO2 Bulbs for Keg Charger.

All Mykegonlegs cylinders feature a high quality factory powder coated finish, are made from high strength, lightweight aluminum alloy and generally have a working life well in excess of 50 years. Comes filled with gas.
Note: this item is only available for pick up
from store. It cannot be shipped.

All Mykegonlegs cylinders feature a high quality factory powder coated finish, are made from high strength, lightweight aluminum alloy and generally have a working life well in excess of 50 years. Comes filled with gas.
Note: this item is only available for pick up
from store. It cannot be shipped.

All Mykegonlegs cylinders feature a high quality factory powder coated finish, are made from high strength, lightweight aluminum alloy and generally have a working life well in excess of 50 years. Comes filled with gas.
Note: this item is only available for pick up
from store. It cannot be shipped.

Micromatic Premium Plus Co2 Regulator
Having researched the various regulators on the market, this unit with
it's great looks, build quality & safety features, we believe it to be the best
value premium model there is.

Got beer in your Micromatic regulator?
This repair kit should cover all your needs.
Warning: Regulators are a pressure instrument & repairs should only
be carried out by a qualified fitter.

Replacement low pressure Micromatic Regulator Gauge. This gauge has a right hand thread, so not suitable for all regulators.

Protect your Mircomatic regulator with this versatile cage.
Please Note:  Does not include regulator.

Replacement high pressure Micromatic Regulator Gauge. This gauge has a left hand thread, so not suitable for all regulators. Generally suits Micromatic Premium Regulator with adjustment knob. This gauge does not fit Premium Plus Regulator with allen key adjustment.

Replacement Nylon Washer for your CO2 Regulator.
Actual washer is white nylon.

pick up only

Westway 6.8 kg Co2 Cylinder (Steel)

Includes 2 gaskets for the dip tubes, 2 for the keg posts & one lid o-ring. Also includes 2 x Universal poppets.
These kits work for Ball lock and most Pin lock kegs

Coupler - Micromatic A Type SS 5/8" Threads. Commonly suits Lion Nathan ( Tooheys, XXXX) Kegs.

Coupler - Micromatic D Type SS 5/8" Threads. Commonly suits CUB ( VB, Carlton Draught) Kegs.

Coupler - Micromatic S Type SS 5/8" Threads. Commonly suits imported European  Kegs.

60cm silicone dip tube and stainless float. This is a replacement part for the fermentasaurus pressure kit but can also be used to fit a floating dip tube to a normal corny keg.

Beer out post for Firestone Keg.
These are 2nd hand posts in good condition.
They do not come with poppet or post seals - please order separately if req'd.

Gas in post for Firestone Keg.
These are 2nd hand posts in good condition.
They do not come with poppet or post seals - please order separately if req'd.

Gas Manifold for up to 4 lines.Splits Gas line into 4 lines with independent barbed ball valve on each outlet.

 

Gas manifold for up to 3 lines.

Food grade Glycol - For use with flooded fonts. Mixed with water, allows 
you to chill recirculating water well below freezing for a beautiful iced font.

Purchase 2 or more & the price drops to $80 each, automatically.
These used Ball Lock kegs are not reconditioned or pressure tested. They may have loose or damaged rubbers on the handles and/or bases.  They may have stickers and some dings. They will need to be cleaned internally and externally and may contain some syrup residue. The Keg lid has a Pressure Relief Valve.
We recommend replacing the seals with a Cornelius Keg Seal Kit.

Price drop!!! - $59.00 to $24.95
Constructed of durable Neoprene, the Keg Parka will keep your beer cold for hours
without the need for buckets of ice. Fits right over any 9L keg and can be taken 
anywhere. Perfect for parties, picnics, or anytime the keg is out of the fridge.
The Parkas have a big KegKing logo, but can be reversed if you prefer plain.

Price drop!!! - $75.00 to $29.95
Constructed of durable Neoprene, the Keg Parka will keep your beer cold for hours
without the need for buckets of ice. Fits right over any 9 or 19L keg and can be taken 
anywhere. Perfect for parties, picnics, or anytime the keg is out of the fridge,
The Parkas have a big KegKing logo, but can be reversed if you prefer plain.

Replacement Gas Diptube for Cornelius Keg.

These high quality O rings are nice & soft, the perfect choice if you are
finding your keg lid hard to seal with the standard seal kit O rings.

Save your money on new poppets by replacing this little seal. A flatter seal that fits the original style Corny keg poppet valves.(This seal will not fit the newer Universal Poppets)

Universal Poppet Valve for Cornelius style kegs.

Replacement post seals for your kegs

Brand New 19 Litre Ball Lock Keg
These premium brand new kegs are rated to 130psi working pressure
and are made using the robotic orbital welding machine. The finish
on these kegs are far superior to other new
economy stainless steel kegs on the market and are made with
super smooth weld making them sanitary and
easier to clean.

Brand New 9.5 Litre Ball Lock Keg (Rubber Top)
These premium brand new kegs are rated to 130psi working pressure and are made using the robotic orbital welding machine.The finish on these kegs are far superior to other new economy stainless steel kegs on the market and are made with super smooth weld making them sanitary and easier to clean. Approx 370mm high and 220 mm diameter.

The easiest way to carbonate beer. This is a Cornelius keg lid with built-in 
carbonation stone! Move the lid from keg to keg to carbonate as needed.

Keg Charger - Premium. This charger kit is made from machined anodised aluminium. The Premium Regulated Charger is very compact but is just large enough to house a very small regulator. No need to worry about pressing the trigger on the charger too much or too little, just use the regulator to set the pressure and forget.
Simply screw on the MFL threaded disconnect, attach to your keg, and set the dispense pressure.

Keg Coupler Adaptor - Gas. 5/8" Thread.

Keg Coupler Adaptor - Liquid. 5/8" Thread.

Keg Coupler Elbow Chrome Plated 5/8" x 5/8". For use on commercial keg couplers inside a Kegerator fridge where height is restricted. Most commonly used with A type keg/coupler as the A type( Lion Nathan, Tooheys, XXXX) kegs are taller.

Connects a Brumby, Micromatic, Perlick or Intertap style tap directly to your keg. Great for travel kegs.Shank Assembly and MFL Beer Disconnect included. Due to the many different tap options we offer, the tap needs to be purchased separately. PLEASE NOTE: TAP NOT INCLUDED.

Keg Lid - New

 

Replacement Silicone Keg Lid Oring for Corny keg lids.

PRV - Pressure Relief Valve for Cornelious keg.

Includes 2 gaskets for the dip tubes, 2 for the keg posts & one lid o-ring.
These kits work for Ball lock and most Pin lock kegs.

Kegmaster Series 4 is a purpose built Kegerator. The Kegerator holds a 50 litre commercial keg of your preferred beer or three 19 litre post mix kegs of your own homebrew. The Kegerator is the obvious choice for serving draught beer from the comfort of your own home. Perfect for anyone looking to put beer on tap at home or at a café, restaurant, or bar.
Please note: Fridge Only. Font not included, but available to purchase seperately. Please contact us to tailor a package to suit your needs.

If you are storing your Series 4 Kegerator in an outdoor area where it's exposed any water, dust, or dirt we recommend you get one of our Water Resistant Covers to keep your fridge in top condition. The cover has hot tape sealed stitching and is made from waterproof fabric so it will defend your kegerator from moisture. The cover also has lift up panels on the sides so you can open the door without removing the entire cover.

The Micromatic Secondary Regulator is used in conjunction with your primary CO2 regulator to set individual gas pressure for an additional keg. It can handle CO2, Nitrogen, or mixed gasses, with a working pressure up to 45 PSI. Connections are the JG push-fit style on both the inlet and outlet. These secondary regulators are "chainable", so you can join together as many as you need, each having its own pressure. Note: you will need a blanking plug at the end of your chain. If you only have one of these secondary regulators you will still need a blanking plug. Add this to your order using the option below. Please also note that the connection is a 3/8" push fit. Optionally select as many hose adapters to fit the 6mm gas line if you don't have 3/8" line. Specifications: Type: Secondary Regulator - CO2, N2, mixed gasses Inlet Connection: 3/8" JG Outlet Connection: shut-off valve + 3/8" JG Capacity: 60 l/min maximum Weight: 120g Dimensions: 120 x 80 x 85mm Max. Inlet: 7 bar / 102 PSI Working Pressure: 0.5-3.1 bar / 45 PSI

Harris 821 Nitrogen Regulator. Type 50 fitting to suit Nitrogen and Nitrogen/Co2 blend cylinders.

Beer out - Quick Disconnect with male barb fitting for ball lock kegs. 
To secure to beer/gas line, you'll also require Stepless Clamp (S/S 5mm).

Black, beverage out Quick Disconnect with male flare fitting.
You will also need either a Swivel Nut & Barb Kit 
or our preference Female Adaptor 1/4" FFL x 5/16" (8mm).

Grey, gas out Quick Disconnect with male flare fitting.
You will also need either a Swivel Nut & Barb Kit 
or our preference Female Adaptor 1/4" FFL x 5/16" (8mm).

Pinlock, beverage out Quick Disconnect with male flare fitting.
You will also need either a Swivel Nut & Barb Kit 
or our preference Female Adaptor 1/4" FFL x 5/16" (8mm).

This is the O-Ring for our plastic quick disconnects. It goes in the inside 
where the screw cap comes out. Fits both Balllock & Pinlock disconnects.

Economical Co2 regulator. Perfect for a basic keg system if you are on a tight budget or an economical second reg for your portable keg system. Can be used for multiple gases (Nitro and Oxygen) by replacing the stem. (Comes fitted with a Type 30 nut and stem for Co2)

Shutoff  Ball Valve for Gas Manifold. 1/4" NPT x 1/4" MFL.
You will also need either a Swivel Nut & Barb Kit
or our preference a Female Adaptor 1/4" FFL x 5/16" (8mm)

Connects Sodastream bottle to regulator - 
Perfect for dispensing kegs at home. or for that party keg.

This hop tube is ideal for addling larger amounts of hop pellets or flowers to a keg or kettle. The fine mesh will prevent large particles from blocking the dip tube, pumps or chillers. It will hold up to approximately 150g of hop pellets, allowing for some space to allow full extraction of the hop oils. Ideal for IPA's and dry hopping in the keg, can also be used for fruits, wood chips, spices and more. Includes a small ring so it can be hung for the keg lid or side of the vessel. Made from quality 304 Grade Stainless Steel Tube Size: 6.6cm diameter, 29.7cm tall

5 in 1 Tap and Font spanner

 The ULTIMATE Growler - 2 Litre
This growler is made from 304grade stainless steel.

Valpar Brewmaster Beer/Gas Line 3/8" (9.5mm) ID x 1/2" (12.7mm) OD. Price per metre.