All Categories
    Filters
    Preferences
    Search

    Magnetic Drive Pump

    $90.00
    New Model now with 1/2" BSP Male Thread
    A cheaper alternative to the March Pump. Constructed from foodgrade materials, it
    handles wort at boiling temperature (rated to 120c). The impeller housing is made
    from polysulfone & the fittings are now 1/2" BSP Male Thread. Will require wiring.
    SKU: MAGPUMP
    Availability: In stock
    Contact

    Specifications
    RPM: 2800
    Voltage: 220-240 at 50-60hz
    Max Head: 3.4m
    Max Flow: 19L/min
    Wiring: Requires Wiring
    Bracket: Steel bracket included
    This pump is constructed of foodgrade materials, handles wort at boiling temperature. The impeller housing is made from polysulfone
    because it is a tough, food-grade plastic rated to temperatures (up to 120C). The magnetic drive acts as a clutch allowing the user to put backpressure on the pump to slow down flow. Since it is magnetic drive, it is not self priming, you must put the pump under the level of the liquid source. This is an extremely efficient 1.1amp pump which can be run non-stop for extended periods at elevated temperatures. No lubricated bearings are in contact with the liquid at all so you know there is
    absolutely no chance of any contamination of the liquid being pumped, which is why this pump is ideal for home brewing.

    NOTE: The pump is sold with an Australian Standard electrical cord but it is not attached to the pump as some customers will have a qualified electrician hard wire the pump to their brewery. If you wish to use the cord that is included you will need a qualified electrician to join the cord to the pump.

    Specifications
    RPM: 2800
    Voltage: 220-240 at 50-60hz
    Max Head: 3.4m
    Max Flow: 19L/min
    Wiring: Requires Wiring
    Bracket: Steel bracket included
    This pump is constructed of foodgrade materials, handles wort at boiling temperature. The impeller housing is made from polysulfone
    because it is a tough, food-grade plastic rated to temperatures (up to 120C). The magnetic drive acts as a clutch allowing the user to put backpressure on the pump to slow down flow. Since it is magnetic drive, it is not self priming, you must put the pump under the level of the liquid source. This is an extremely efficient 1.1amp pump which can be run non-stop for extended periods at elevated temperatures. No lubricated bearings are in contact with the liquid at all so you know there is
    absolutely no chance of any contamination of the liquid being pumped, which is why this pump is ideal for home brewing.

    NOTE: The pump is sold with an Australian Standard electrical cord but it is not attached to the pump as some customers will have a qualified electrician hard wire the pump to their brewery. If you wish to use the cord that is included you will need a qualified electrician to join the cord to the pump.

    Customers who bought this item also bought

    Silicone Hose - Light Duty (ID12.7mm)

    SILHOSETW
    $9.50

    In stock

    Silicone Hose Tubing 1/2 inch - Light Duty.
    12.7mm inside diameter x 16.7mm outside diameter. Perfect for our Crown Urn taps. For pumping 
    under pressure/vacuum we recommend Silicone Hose - Heavy Duty

    Camlock Plug 1/2" Hosetail

    CAMLPLUGHT
    $9.95

    In stock

    Stainless Steel Camlock Plug 1/2" Hosetail

    Silicone Hose - Heavy Duty (ID 12.7mm)

    SILHOSEMM
    $16.95

    In stock

    Silicone Hose Tubing ID 12.7mm OD 20mm. Perfect for 1/2" barbs. Food grade silicone hose, able to withstand boiling wort or water.
    water & resist collapsing under suction whilst hot.

    Ball Valve SS 1/2" 2pc FP

    BALVAL1/2SS2PFP
    $19.95

    In stock

    Stainless steel (304 grade) 2 piece Ball Valve. 1/2" Full Port with 1/2" BSP on both sides.

    Camlock Socket 1/2" Bsp Male

    CAMLSOCKM
    $14.95

    In stock

    Stainless Steel Camlock Socket 1/2" Bsp Male