All Categories

    Micromatic Secondary Regulator

    The Micromatic Secondary Regulator is used in conjunction with your primary CO2 regulator to set individual gas pressure for an additional keg. It can handle CO2, Nitrogen, or mixed gasses, with a working pressure up to 45 PSI. Connections are the JG push-fit style on both the inlet and outlet. These secondary regulators are "chainable", so you can join together as many as you need, each having its own pressure. Note: you will need a blanking plug at the end of your chain. If you only have one of these secondary regulators you will still need a blanking plug. Add this to your order using the option below. Please also note that the connection is a 3/8" push fit. Optionally select as many hose adapters to fit the 6mm gas line if you don't have 3/8" line. Specifications: Type: Secondary Regulator - CO2, N2, mixed gasses Inlet Connection: 3/8" JG Outlet Connection: shut-off valve + 3/8" JG Capacity: 60 l/min maximum Weight: 120g Dimensions: 120 x 80 x 85mm Max. Inlet: 7 bar / 102 PSI Working Pressure: 0.5-3.1 bar / 45 PSI
    Availability: Out of stock
    Customers who bought this item also bought

    Straight Reducer 3/8" to 5/16" (8mm)


    Out of stock

    3/8" Stem x 5/16" (8mm OD) Tube. Use this inline reducer to connect our John Guest 3/8" Shut Off Valve to 8mm OD hose.

    Stepless Clamp SS 10.5mm (8-10mm OD Line)


    Out of stock

    Stainless Steel stepless clamp for securing beer/gas line 8mm to 10mm OD.

    Plug - OD 3/8" (3/8")


    In stock

    End blanking plug for John Guest Fittings fittings.

    Quick Disconnect Barb (Gas in)


    In stock

    Quick Disconnect MFL (Gas)


    In stock

    Grey, gas out Quick Disconnect with male flare fitting.
    You will also need either a Swivel Nut & Barb Kit 
    or our preference Female Adaptor 1/4" FFL x 5/16" (8mm).