Premium Quality Keg Charger and Disconnect. Genuine Innovations Brand.
Ideal for dispensing party kegs. Just connect directly to your keg "gas in" post & use the trigger to apply gas as required. 
Takes 16gm threaded CO2 bulbs. Includes MFL Disconnect.

Threaded CO2 Bulbs for Keg Charger.

Micromatic Premium Plus Co2 Regulator
Having researched the various regulators on the market, this unit with
it's great looks, build quality & safety features, we believe it to be the best
value premium model there is.

Got beer in your Micromatic regulator?
This repair kit should cover all your needs.
Warning: Regulators are a pressure instrument & repairs should only
be carried out by a qualified fitter.

Replacement low pressure Micromatic Regulator Gauge. This gauge has a right hand thread, so not suitable for all regulators.

Protect your Mircomatic regulator with this versatile cage.
Please Note:  Does not include regulator.

Replacement high pressure Micromatic Regulator Gauge. This gauge has a left hand thread, so not suitable for all regulators. Generally suits Micromatic Premium Regulator with adjustment knob. This gauge does not fit Premium Plus Regulator with allen key adjustment.

Gas Manifold for up to 4 lines.Splits Gas line into 4 lines with independent barbed ball valve on each outlet.

Gas manifold for up to 3 lines.

Keg Charger - Premium. This charger kit is made from machined anodised aluminium. The Premium Regulated Charger is very compact but is just large enough to house a very small regulator. No need to worry about pressing the trigger on the charger too much or too little, just use the regulator to set the pressure and forget.
Simply screw on the MFL threaded disconnect, attach to your keg, and set the dispense pressure.

Harris 821 Nitrogen Regulator. Type 50 fitting to suit Nitrogen and Nitrogen/Co2 blend cylinders.

Economical Co2 regulator. Perfect for a basic keg system if you are on a tight budget or an economical second reg for your portable keg system. Can be used for multiple gases (Nitro and Oxygen) by replacing the stem. (Comes fitted with a Type 30 nut and stem for Co2)

Shutoff  Ball Valve for Gas Manifold. 1/4" NPT x 1/4" MFL.
You will also need either a Swivel Nut & Barb Kit
or our preference a Female Adaptor 1/4" FFL x 5/16" (8mm)